AcuLink 810

Support

AcuLink 810 Firmware Release

V1.09
Release date: May 21, 2020
New Features:
  • Support scanning BACnet device and points, then provide users with complete template without knowing or using EPICS file of devices in the network
  • Support Virtual meter to be added as device. Each virtual meter can have multiple parameters, each parameter is calculated from user-configured formula and other meter’s reading. Similar to other physical devices, virtual meter’s data can be logged, and logs can be posted via HTTP, FTP and MQTT
  • Support 802.1x radius enterprise level authentication in WiFi
V1.08
Release date: April 22, 2020
New Features:
  • Support configuration of outbound traffic network routing
  • Improved display format of Mbus device serial number
  • Add Device Type, Reading Time in Mbus device list
  • Support filter on Mbus device list
  • Mbus device can be added to logger automatically after the discovery
Bug Fixes:
  • Fixed a bug in MQTT posting interval not following configuration
  • Fixed a bug in Mbus which cause scanning to be slow
V1.06
Release date: March 18, 2020
New Features:
  • Support BACnet-IP Whois scanning of network. User is able to add found devices to device reading list. No EPICS file is required.
  • Support SNMP gateway- Convert any Modbus,BACnet and Mbus devices to be readable by SNMP system. MIB file will be generated by AcuLink 810 for each device.
V1.04
Release date: March 18, 2020
New Features:
  • Support scan for Modbus-RTU devices with multiple Parity at same time
  • Support Proxy network setting
  • Add an identifier in post file to simplify server’s identification of multiple AcuLink 810 posting at same time
Bug Fixes:
  • Fixed a bug in the time synchronization process
V1.03
Release date: March 18, 2020
New Features:
  • Support Rapid Logger- logging interval up to 1-second
  • Support MQTT protocol for IoT applications
  • Support built-in eight pulse counters (digital inputs) to be read via Modbus-TCP and BACnet-IP
  • Support data type INT64, signed integer in Modbus device template
V1.02
Release date: November 1, 2019
New Features:
  • Support and compliance to SunSpec
  • Support create and edit device template file in AcuLink 810 web interface
Bug Fixes:
  • Fixed a bug in preventing alarm notification email to be sent
V1.01
Release date: September 12, 2019
New Features:
  • Support built-in AcuMesh
  • Support Remote Device Access. User is able to access AcuLink 810 remotely via SerialNumber.accuenergy.io
  • Support BACnet-gateway. Modbus devices are available to be polled via BACnet-IP as virtual devices
  • Support data acquisition from BACnet-MS/TP devices
Bug Fixes:
  • Fixed a bug in digital input value is not available in AcuCloud