AXM-Web Push

Support

AXM-WEB-PUSH Firmware Releases

V1.36
Release date May 21, 2020
New Features:
  • Support Remote Access, access the meter remotely via SerialNumber.accuenergy.io
Bug Fixes:
  • Fixed an error in post file header for THD_I
  • Fixed a bug in BACnet-IP communication respond intermittently in rare cases
  • Fixed a bug where register foreign device fails periodically
V1.33
Release date August 9, 2019
Bug Fixes:
  • Fixed a bug that could cause timezone setting to be incorrect
V1.32
Release date: June 13, 2019
New Features:
  • Support STMP SSL to be on, off or auto
  • Support delete datalogging files from webpage directly
  • Support configurable datalogging parameters
V1.31
Release date: May 17th, 2019
New Features:
  • Support WiFi password as blank
  • Support import and export of configuration as a file
Bug fixes:
  • Fixed a bug that causes incorrect datalog file to be created
  • Fixed a bug that causes DNP3.0 time sync to be incorrect
V1.22
Release date: August 27, 2018
New Features:
  • Add network diagnostic tools to check network connectivity and issues
V1.16
Release date: April 12, 2018
New Features:
  • Support data visualization on real-time and energy parameters over historical logging
  • Support test email function for SMTP setting validation
  • Display BSP version on webpage
  • Support remote over-the-air firmware update
  • Update cybersecurity for Denial of Service susceptibility
Bug fixes:
  • Fixed a bug that could cause memory leak in some cases
V1.14
Release date: December 18, 2017

New Features:

  • Support New Protocol: SNMP V2 and trap.
  • Prompt user to reboot module after setting change.
  • Add HTTP access to webpage in addition to HTTPs access only
V1.12
Release date: November 14, 2017
New Features:
  • Add following parameters in data post protocols:
    • Four Analog Input channels:
    • Frequency
    • Per phase, even and odd voltage/current Total Harmonics Distortions (THD)
  • Datalogging frequency can be configured up to 15 seconds. All measurements can be logged every 15 seconds
  • Data posting protocols include HTTP, HTTPs and FTP post intervals can be configured to up to 15 seconds.
  • Support sFTP data storage server locally on module. User can access historical datalogs from sFTP server.
  • Support Proxy server settings – In enterprise or high-security network, proxy server is used for routing web traffic, such as data post or remote access to meter.
  • Compliance with latest security protocols such as TLS 1.2, AES.
  • Add Copy Serial Number function in AcuCloud connection page, simplify AcuCloud registration process
  • Support unlimited Modbus-TCP/IP simultaneous connections
  • Support System Log- Provide export of system performance log to enable easier investigation after error/bugs/issues occurs. User can download the log and send to Accuenergy support team for quick determination of root cause of most issues.
V1.11
Release date: November 14, 2017
New Features:
  • Now user can access meter’s webpage without knowing it’s IP address. By typing in “http://SerialNumber.local” (e.g. http://AM16001122.local) when meter and access device such as computer or smartphone is in same network.
  • If DHCP is enabled on meter, and directly connect meter with computer, the webpage can be accessed by typing in “http://SerialNumber.local” in browser directly.
Bug fix:
  • Fix detection of ethernet cable connection status
V1.08
Release date: June 26, 2017
New Features:
  • Add phase angle diagram on webpage – User is able to view phase angle diagram and determine wiring issue directly from webpage
  • Add CT polarity setting to webpage – Reverse CT polarity directly from webpage when there’s installation error on CT direction. This setting eliminates the need to physically reverse the CT polarity and interrupt operation.
  • Add sequence component diagram on webpage
  • Support time configuration directly on webpage
  • Add Clear Post Files function, user can clear the backup datalog files from webpage
  • Add AcuCloud Facility Energy Metering Platform setup page, enable meter to connect to AcuCloud with simple registration process