Proper energy meter configuration is essential to maximizing data accuracy and overall project success. At Accuenergy, we are committed to helping you set up your Acuvim II + AXM-WEB2 as quickly as possible so we’ve created a How To Video Series where we break down the setup process into easy-to-follow sections. Our short walkthroughs will teach you to efficiently navigate our web interface and get the most out of your metering devices.
Before Acuvim II setting updates can take effect, the communication module must be rebooted. If making changes to multiple settings, it can be helpful to postpone the reboot process until all the settings have been updated. The module can be reboot anytime using the web interface.
To complete these steps, you will need an Acuvim II meter with the AXM-WEB2 module powered up and connected to an internal network or the Internet plus the IP address of the device.
Enter the IP address of the AXM-WEB2 module in your web browser. This will take you to the Accuenergy Login screen which prompts you for an Access Level and Password. Select “Admin” for the Access Level and enter the case-sensitive password for your module (default password: admin). Click the “Sign In” button.
Upon logging in, you will be taken to the Dashboard screen. Click “ Settings” in the upper right corner. This will display the “Meter” tab and multiple device settings.
For demonstration purposes, change a few of the settings on this page. Click the “Save” button and choose “Reboot Later.”
To manually reboot the module, click “ Settings” again and select the “Management” tab. Find the “Reboot Meter & Communications Module” option and press the “Reboot” button. Confirm your choice by selecting the red “Reboot” button.
The reboot process, which takes 1-2 minutes, will begin right away. Once complete, you may log back in again to confirm or adjust any settings by following the login process outlined in Step 1. After the settings are confirmed, you may log out again.
This completes the processes for rebooting the communications module.
For more information on configuring the Acuvim II + AXM-WEB2 module, visit our Video Guide page or Contact Us.