Mouseover to zoom-in
AcuHMI 4 in remote meter monitor front view.
AcuHMI 4 in remote meter monitor front view.
AcuHMI 4 in remote meter monitor quarter right view.
AcuHMI 4 in remote meter monitor top front view.
AcuHMI 4 in remote meter monitor bottom back view.
UL Listed
CE
RoHS

Remote Meter Monitor

The AcuHMI 4” Display is an HMI for centralized monitoring, configuration, and management of up to 8 compatible Accuenergy meters. The full-colour LCD provides real-time electrical measurements, power quality data, meter status, and phasor diagrams, with front-panel access to meter settings and configuration. Ethernet and RS485 connectivity support Modbus communication, while password protection provides controlled access to meter settings and relay outputs.

  • 65,536 colour LCD with tactile navigation buttons for meter monitoring and configuration.
  • Real-time electrical measurements, harmonics, meter status, and phasor diagrams.
  • Monitors of up to 8 meters simultaneously, including the AcuRev 1320, Acuvim II, and AcuRev 4100.
  • RSTP support for network redundancy, with DHCP or static IP addressing.
  • Configurable network settings with DHCP or static IP addressing.
  • Modbus RTU and Modbus TCP communication via RS485 and dual 10/100 Mbps Ethernet ports.
  • Firmware upgrade through RS485 or Ethernet.
  • Dual-bank firmware architecture protects against power-failures.
  • 12 – 36 VDC supply with reverse polarity and ±1 kV surge protection.
  • 96 × 96 mm panel mount with an IP54-rated front panel and optional DIN rail mounting.

AcuHMI 4” Display Overview

Remote Meter Display

The AcuHMI 4” Display is a remote display for viewing energy and power measurement data from multiple connected meters. The full-colour LCD provides a centralized view of real-time electrical measurements, energy data, power quality, meter status, and phasor diagrams, with tactile navigation buttons for accessing readings and meter information.

Centralized Access to Metering Data

Acuview 2 software connects to the AcuHMI 4” Display allowing users to add up to eight meters to provide a flexible, centralized access to monitor metering data from the AcuRev 1320, Acuvim II, and AcuRev 4100 meters. Directly configure RS485 or Ethernet via Modbus to view real-time electrical measurements, harmonics, phasor diagrams, meter status, and device information.

AcuHMI 4” Display Main Features

AcuHMI 4 in centralized monitoring feature.

Centralized Monitoring

Monitor multiple meters simultaneously from a single central remote hub. Ideal for device management from distribution panels and switchboard systems.

Key Specifications:

  • Monitor up to 8 compatible meters from a single centralized display.
  • View connected meter online or offline status from the device list.
  • Access independent meter data and readings for each connected meter.
  • Support multiple meter installations with automatic wiring-based phase mapping.
  • Access device identification and communication details for maintenance.
AcuHMI 4 in real-time monitoring feature.

Real-Time Monitoring

Display real time parameters, units, device status, and available screens of each connected downstream meter.

Key Specifications:

  • View electrical measurements and device status on the colour LCD.
  • Monitor voltage, current, power, power factor, frequency, energy, and demand readings.
  • View harmonics and phasor diagrams from connected meters.
  • View digital input, digital output, and relay status of connected meters.
  • Access relay output controls with password-protected access.
AcuHMI 4 in multi-protocol support feature.

Multi-Protocol Support

Supports flexible Modbus communication for connected meters and integration with upstream monitoring and control systems.

Key Specifications:

  • Support Modbus RTU and Modbus TCP communication through RS485 and dual Ethernet ports.
  • Connect up to four concurrent upstream Modbus TCP connections.
  • Communicate with downstream meters over Ethernet or RS485.
  • Support integration with BMS, SCADA, and energy management systems.
AcuHMI 4 in management and configuration feature.

Management & Configuration

Provides secure meter configuration, firmware management, and protection for reliable operation.

Key Specifications:

  • Configure meter wiring, CT/PT ratios, demand settings, communication parameters, and HMI settings.
  • Password-protected access restricts meter configuration and relay output controls.
  • Dual-bank firmware architecture protects against interrupted firmware updates.
  • Built-in reverse polarity and ±1 kV surge protection.
Multi-Protocol Gateway Icon
Centralized Monitoring
AcuHMI 4 in centralized monitoring feature.

Centralized Monitoring

Monitor multiple meters simultaneously from a single central remote hub. Ideal for device management from distribution panels and switchboard systems.

Key Specifications:

  • Monitor up to 8 compatible meters from a single centralized display.
  • View connected meter online or offline status from the device list.
  • Access independent meter data and readings for each connected meter.
  • Support multiple meter installations with automatic wiring-based phase mapping.
  • Access device identification and communication details for maintenance.
AcuHMI 4 in real-time monitoring icon.
Real-Time Monitoring
AcuHMI 4 in real-time monitoring feature.

Real-Time Monitoring

Display real time parameters, units, device status, and available screens of each connected downstream meter.

Key Specifications:

  • View electrical measurements and device status on the colour LCD.
  • Monitor voltage, current, power, power factor, frequency, energy, and demand readings.
  • View harmonics and phasor diagrams from connected meters.
  • View digital input, digital output, and relay status of connected meters.
  • Access relay output controls with password-protected access.
AcuHMI 4 in multi-protocol support icon.
Multi-Protocol Support
AcuHMI 4 in multi-protocol support feature.

Multi-Protocol Support

Supports flexible Modbus communication for connected meters and integration with upstream monitoring and control systems.

Key Specifications:

  • Support Modbus RTU and Modbus TCP communication through RS485 and dual Ethernet ports.
  • Connect up to four concurrent upstream Modbus TCP connections.
  • Communicate with downstream meters over Ethernet or RS485.
  • Support integration with BMS, SCADA, and energy management systems.
AcuHMI 4 in management and configuration icon.
Management & Configuration
AcuHMI 4 in management and configuration feature.

Management & Configuration

Provides secure meter configuration, firmware management, and protection for reliable operation.

Key Specifications:

  • Configure meter wiring, CT/PT ratios, demand settings, communication parameters, and HMI settings.
  • Password-protected access restricts meter configuration and relay output controls.
  • Dual-bank firmware architecture protects against interrupted firmware updates.
  • Built-in reverse polarity and ±1 kV surge protection.

AcuHMI 4” Display Architecture

AcuHMI 4 in network architecture diagram.

AcuHMI 4” Display Product Map

AcuHMI 4 in product map diagram.
1

LCD

Full-colour 320x2240px backlit display

4

Ethernet Ports

Dual RJ45 Ethernet with 10/100 Mbps for Modbus TCP

2

RS485 Port

3-pin terminal block for Modbus RTU

5

Navigation Keys

Five buttons for screen navigation and settings configuration

3

Power Supply Terminal

2-pin terminal block for 12 - 36 VDC power input

1

LCD

Full-colour 320x2240px backlit display

2

RS485 Port

3-pin terminal block for Modbus RTU

3

Power Supply Terminal

2-pin terminal block for 12 - 36 VDC power input

4

Ethernet Ports

Dual RJ45 Ethernet with 10/100 Mbps for Modbus TCP

5

Navigation Keys

Five buttons for screen navigation and settings configuration

AcuHMI 4” Display Models

AcuHMI-1-4
Applications Industrial and Commercial Buildings
Distribution Panels
Building Management Systems (BMS)
Tenant Billing Systems
Data Center and PDU Monitoring
SCADA and Energy Management Systems
Support Meters Acuvim II, AcuRev 1320, AcuRev 4100
Max. Connected Meters 8
Downstream Protocols Modbus TCP, Modbus RTU
Upstream Protocols Modbus TCP
Ethernet Ports Dual RJ45 Ethernet ports; supports RSTP
Serial Port Single RS485 Modbus
Mounting Panel Mount, DIN Rail Mount
AcuHMI-1-4
Applications Industrial and Commercial Buildings
Distribution Panels
Building Management Systems (BMS)
Tenant Billing Systems
Data Center and PDU Monitoring
SCADA and Energy Management Systems
Support Meters Acuvim II, AcuRev 1320, AcuRev 4100
Max. Connected Meters 8
Downstream Protocols Modbus TCP, Modbus RTU
Upstream Protocols Modbus TCP
Ethernet Ports Dual RJ45 Ethernet ports; supports RSTP
Serial Port Single RS485 Modbus
Ethernet Ports Dual RJ45 Ethernet ports; supports RSTP
Serial Ports Two RS485 Modbus; daisy chain up to 32 devices per port
Mounting Panel Mount, DIN Rail Mount

AcuHMI 4” Display FAQ

Can a BMS or SCADA system access meter data through the AcuHMI 4” Display?

Yes. The built-in Modbus TCP pass-through allows upstream BMS or SCADA systems to access up to 8 downstream meters over Ethernet or RS485.

Are the screen sequence or the displayed pages customizable?

No. It follows a predefined structure. Available pages are displayed as per the connected meter. AcuHMI 4” display will hide the pages containing unavailable values.

Can the device depict individual meter readings and totalized values?

Yes. It supports individual meter readings and summation pages for compatible meters.

Does the AcuHMI 4” Display support third-party Modbus devices?

No. The AcuHMI is compatible with Accuenergy Meters.

How to reset a forgotten password?

If forgotten, the password can be changed using Acuview 2. The password is mainly required for protected HMI operations, but not for changes made through Modbus registers.