Power & Energy Meters

The Acuvim 3 Series is a certified IEC 61000-4-30 power quality meter by NMi with revenue grade energy metering capabilities. It offers PQ analysis by capturing waveform, harmonics, frequency, transients, voltage, and current at high precision. Measurements are sampled at high speed data rates, a 32 GB data log storage capacity, event trigger detection and EN50160/IEEE519 compliant reports.

Advanced revenue grade ANSI C12.20 class 0.1 energy meter with Modbus-RTU & DNP3 support for over 400 and power quality parameters. Up to 8GB data logger with 3 historical profiles. Configure any rate structure combination for time-based, calendar-based, demand-based, or tier-based.

BTL Listed BACnet power meter with ANSI C12.20 class 0.2 accuracy. Measure over 100 real-time metering parameters. Monitor electrical parameters on single, two and three element systems. No PT/VT needed, directly measure up to 400V L-N or 690V L-L.

Multifunction power & energy meter with ANSI C12.20 class 0.2 accuracy for power quality analysis, time-of-use (TOU) and 16 over/under alarm configurations for any of 80 available parameters. Modbus-RTU, BACnet MS/TP & PROFIBUS plus digital input/output options available.

The DIN rail power & energy meter includes four channel CT input to measure neutral current and provide residual current measurement. Auto phase-check ready to monitor wiring issues. Standard Modbus-RTU + BACnet MS/TP. Measurement Canada Approved, BTL Listed, & SunSpec compliant.

MID certified and conforms to EN 50470-4 Class C plus IEC 62053-41 Class 0.5 standards, the EV charging meter with dual-channel charge ports deliver 0.1% voltage accuracy from 60-1000VDC and 0.2% current accuracy via shunt. Includes electronic metrology seal, cable loss compensation, and Modbus communication.

IEC 62053-41 Class 0.5 accurate DC power and energy meter with one DC voltage input and two isolated DC current inputs. Delivering direct-connected 0.1% voltage and 0.2% current accuracy via external shunt or Hall effect sensor, integrating three data loggers, 1 trend logger, electronic metrology seal, Modbus communication, and cable loss compensation.

High-accuracy DC energy meter with signed OCMF data output for EV fast charging, featuring 0.1% voltage accuracy (60–1000 VDC) and 0.2% current accuracy via shunt. Compliant with IEC 62053-41:2021 Class 0.5 and MID certified. Includes cable loss compensation, electronic metrology seal, and four configurable data logger.

DC multifunction power & energy meter with optional RS485 Modbus-RTU, & 4MB onboard data logger. Equipped with choice digital input and output; analog and relay output I/O expansion module. 0.2% accuracy on voltage and current; 0.5% on power and energy parameters.

ANSI C12.20 0.5 class energy meter with support for any voltage system rated between 10V to 230V/ 400V. Potential transformer ratio configuration also supported. Auto frequency detection for 50Hz and 60 Hz systems. Multiple built-in I/O options available.

Multi-Circuit submeter measures up to 18 circuits for real-time metering & power quality analysis. 8GB data logger memory. Includes Modbus-RTU, BACnet MS/TP, Modbus TCP/IP, BACnet IP, SMTP, HTTP/HTTPS Post, FTP, SNMPv3, NTP, RSTP, dual Ethernet, WiFi, 18 DI, 2 RO ports. Web interface for remote access.

Multi-channel submeter monitors either 9 or 18 circuits simultaneously. ANSI C12.20 0.5 class. Supports Modbus TCP/IP, BACnet-IP, WiFi, Ethernet, HTTP/HTTPS Post, FTP, SMTP, & SNTP over TLS 1.2 encrypted channel. Poll metering & power quality data with 4GB onboard data logger at 15-minute intervals.